Inside And Outside Cylinder Locomotive Animation
Inside And Outside Cylinder Locomotive Animation. In coupled locomotives, the driving wheels are connected to the leading and trailing wheel by an _______ coupling rod. There are two main forms of cylinder layouts:
An inside cylinder locomotive has its cylinder centre lines 0.7 m apart and has a stroke of 0.6 m. Shorter length makes a locomotive easier to turn around. Because a locomotive may have three or.
The Movement Of The Inside Valve Spindle Is Derived From The Combined Action Of The Outside Spindles Operating Together Through Long And Short Levers On Fixed And Floating Pivots Respectively.
Outside cylinders are driven by cranks on extensions to the driving axles. In the inside cylinder locomotives, the two cylinders are placed in between the planes of two driving wheels as shown in fig. Between the wheels inline with the boiler.
The Reciprocating Masses Are 300 Kg For Inside Cylinder And 260 Kg For Each Outside Cylinder And The Planes Of Rotation Of The Balance Masses Are 0.8 M From The Inside Crank.
The rotating masses per cylinder are equivalent to 150 kg at the crank pin, and the reciprocating masses per cylinder to 180 kg. Fortunately simulation can now evaluate the circumstances and modify the basic 2:1 components. 2) size, the distance between the frames of a loco are determined by the gauge of the track on which it.
Whereas In The Outside Cylinder Locomotives, The Two Cylinders Are Placed Outside The Driving Wheels, One On Each Side Of The Driving Wheel.
On engines with outside cylinders there are three possible variations: With a spool valve(piston valve) the pressure is equal inside the steam chest, whereas on a slide valve, it's all on one side of the sealing surface. These are some of the chief reasons for the increasing use of outside cylinders in this country.
The Spindles Are Operated By A Double “Pendulum” Shaft, The Inside Arm Being Connected To The Valve Spindle, While The Outside Arm Is Driven By The Valve Gear, The Combination Lever Of Which Is Suspended From It.
The cylinders could be mounted between the mainframes (known as inside cylinders), or mounted outside the frames and driving wheels (outside cylinders). The wheel centre lines are 1.5 m apart. The high pressure steam presses the piston backward, driving the engine wheels around one half turn.
Many Lines Had Length Limits For Locomotives To Ensure They Would Fit On The Turntables.
The reason for this difference is unclear. The pitch of the cylinders is 1 metre and the stroke of each piston is 0.6 m. Firebox can be longer for a given wheel base with outside cylinders, as it can be brought closer to a straight axle.
Post a Comment for "Inside And Outside Cylinder Locomotive Animation"